Nanolif Yapılı Poli (Akrilonitril-Vinil Asetat)/ Grafen Oksit Yapıların Karakterizasyonu

1. Sengupta R., Bhattacharya M., Bandyopadhyay S., Bhowmick A.K., (2011), A Review On The Mechanical And Electrical Properties of Graphite And Modified Graphite Reinforced Polymer Composites, Prog. Polym. Sci. 36, 638â€“670.
http://dx.doi.org/10.1016/j.progpolymsci.2010.11.003



2. Topçu A.A., (2012), A Green Pathway For The Production of Chemically Exfoliated Graphene Sheets With The Assistance of Microwave Irradiation, Master of Science, Koç University.

3. Song J., Wang X. and Chang C.T., (2014), Preparation and Characterization of Graphene Oxide, Hindawi-Journal of Nanomaterials, Vol. 2014, Artical ID 276143, 6 p.

4. Ersoy M.S., Dönmez U., Yildiz K., Salan T., Yazici M., Tiyek İ., Alma M.H., (2015), Graphene Applied Textile Materials For Wearable E-Textiles, 5th International Istanbul Textile Congress 2015: Innovative Technologies "Inspire To Innovate", Book of Proceedings, pp.82-86, 11th -12th September 2015, Istanbul

5. Botas C., Lvarez P.A., Blanco P., Granda M., Blanco C., Santamarı R.A., Romasanta L.J., Verdejo R., Loâ€™Pez-Manchado M.A., Menendez R., (2013), Graphene Materials With Different Structures Prepared From The Same Graphite By The Hummers And Brodie Methods, Carbon 65, 156 â€“164. http://dx.doi.org/10.1016/j.carbon.2013.08.009

6. Chen J., Yao B., Li C., Shi G., (2013), An Improved Hummers Method For Eco-Friendly Synthesis of Graphene Oxide, Carbon 64, 225â€“229, 2013. http://dx.doi.org/10.1016/j.carbon.2013.07.055

7. Park S. And Ruoff R., (2009), Chemical Methods For The Production of Graphene, Nature Nanotechnology, 4, 217-224. http://dx.doi.org/10.1038/nnano.2009.58

8. Marcano D.C., Kosynkin D.V., Berlin J.M., Sinitskii A., Sun Z., Slesarev A., Alemany L.B., Lu W. and Tour J.M., (2010), Improved Synthesis of Graphene Oxide, Amercan Chemical Society ACSNANO, Vol.4 No.8.

9. Wang Q., Du Y., Feng Q., Huang F., Lu K., Lui J., Wei Q., (2013), Nanostructures and Surface Nanomechanical Properties of Polyacrylonitrile/Graphene Oxide Composite Nanofibres by Electrospinning, Journal of Appl. Pol. Sci., 1152-1156.

10. Song N., Yang J. Ding P., Tang S., Liu Y., And Shi L., (2014), Effect of Covalent-Functionalized Graphene Oxide With Polymer And Reactive Compatibilization On Thermal Properties of Maleic Anhydride Grafted Polypropylene, Industrial & Engineering Chemistry Research, 53(51), 19951âˆ’19960. http://dx.doi.org/10.1021/ie5031985

11. Karteri İ., Karataş Ş., Yakuphanoğlu F., (2014), Electrical Characterization of Graphene Oxide And Organic Dielectriclayers Based On Thin Film Transistor, Applied Surface Sci., 318, 74-78. http://dx.doi.org/10.1016/j.apsusc.2014.01.013

12. Huang Y., QinY., Zhou Y., Niu H., Yu Z.Z, And Dong J.Y., (2010), Polypropylene/Graphene Oxide Nanocomposites Prepared By In Situ Ziegler-Natta Polymerization, Chem. Mater., 22, 4096â€“4102. http://dx.doi.org/10.1021/cm100998e

13. Menchaca-Campos C., GarcÃa-PÃ©rez C., Casta-eda I., GarcÃa- SÃ¡nchez M.A., GuardiÃ¡n R., and Uruchurtu J., (2013),Nylon/Graphene Oxide Electrospun Composite Coating. Hindawi Publishing Corporation, International Journal of Polymer Science,

14. Yuan B., Bao C., Song L., Hong N., Liew K.M., Hu Y., (2014), Preparation of Functionalized Graphene Oxide/Polypropylene Nanocomposite With Significantly İmproved Thermal Stability And Studies On The Crystallization Behavior And Mechanical Properties, Chemical Engineering Journal, 237, 411â€“420. http://dx.doi.org/10.1016/j.cej.2013.10.030

15. Ke H., Pang Z., Xu Y., Chen X., Fu J., Cai Y., Huang F., Wei Q., (2014), Graphene Oxide Improved Thermal and Mechanical Properties of Electrospun Methy Stearate/Polyacrylonitrile From- Stable Phase Cahnge Composite Nanofibers, J. Therm Anal Calorim, 117, pp.109-122. http://dx.doi.org/10.1007/s10973-014-3669-7

16. Hu X., Yu Y., Wang Y., Zhou J., Song L., (2015), Separating Nano Graphene Oxide From The Residual Strong-Acid Filtrate of The Modified Hummers Method With Alkaline Solution, Applied Surface Science, 329, 83-86. http://dx.doi.org/10.1016/j.apsusc.2014.12.110

17. Hanifah M.F.R, Jaafar J., Aziz M., Ismail A.F., Rahman M.A., Othman M.H.D., (2015), Synthesis of Graphene Oxide Nanosheets Via Modified Hummers' Method and Its Physicochemical Properties, Jurnal Teknologi, 74:1, 189-192. http://dx.doi.org/10.11113/jt.v74.3555

18. Saufi, S.M. and Ismail, A.F., (2002), Development And Characterization of Polyacrylonitrile (PAN) Based Carbon Hollow Fiber Membrane, Songklanakarin Journal of Science and Technology, 24(Suppl.) : 843-854.

19. Wang Y.X., Wang C.G., Wu J.W., Jing M., (2007), High- Temperature DSC Study of Polyacrylonitrile Precursors during Their Conversion to Carbon Fibers, Journal of Applied Polymer Science, Vol. 106, 1787â€“1792. http://dx.doi.org/10.1002/app.26862

20. Karacan İ.,(2012), Thermal Stabilization of Polyacrylonitrile Fibers, Society of Plastic Engineers, Plastic Reaserch Online, 10.1002/spepro.003968.

21. Tiyek İ., Bozdoğan F., (2005), Akrilik Lif Üretiminde Koagülasyon Banyosunun Önemi, Pamukkale Üniversitesi Mühendislik Fakültesi, Mühendislik Bilimleri Dergisi, 11 (3) 319-323.

22. Farsani, R. E., Raissi, S., Shokuhfar, A., & Sedghi, A. (2009), FTIR Study Of Stabilized PAN Fibers For Fabrication of Carbon Fibers, World Academy of Science, Engineering and Technology, 50, 430-433.

23. Mack, J. J., Viculis, L. M., Ali, A., Luoh, R., Yang, G., Hahn, H. T., Ko F.K., Kaner, R. B. (2005), Graphite Nanoplatelet Reinforcement Of Electrospun Polyacrylonitrile Nanofibers. Advanced Materials, 17(1), 77-80. http://dx.doi.org/10.1002/adma.200400133

24. Hou, H., Ge, J. J., Zeng, J., Li, Q., Reneker, D. H., Greiner, A., Cheng, S. Z. (2005), Electrospun Polyacrylonitrile Nanofibers Containing A High Concentration Of Well-Aligned Multiwall Carbon Nanotubes, Chemistry of Materials, 17(5), 967-973. http://dx.doi.org/10.1021/cm0484955

25. Cengiz Çallıoğlu, F., (2013), Silindirli Elektro Lif Çekim Yöntemi ile Nano Lif Üretimi, Journal of Textiles & Engineers/Tekstil ve Mühendis, 20 (91).

26. Karteri İ., Karataş Ş., Al-Ghamdi A., Yakuphanoğlu F., (2015), The Electrical Characteristics of Thin Film Transistors With Graphene Oxide and Organic Insulators, Synthetic Metals, 199, 241â€“245. http://dx.doi.org/10.1016/j.synthmet.2014.11.036

27. Ryu S.H., Shanmugharaj A.M., (2014), Influence of Long-Chain Alkylamine-Modified Graphene Oxide On The Crystallization, Mechanical and Electrical Properties of Isostatic Polypropylene Nanocomposites, Chem. Eng. J. 244, 552-560, 2014. http://dx.doi.org/10.1016/j.cej.2014.01.101

28. Chien, A.T., Liu, H.C., Newcomb, B.A., Xiang, C., Tour, J.M., Kumar, S., (2015), Polyacrylonitrile Fibers Containing Graphene Oxide Nanoribbons, ACS Applied Materials & Interfaces, 7(9), 5281-5288. http://dx.doi.org/10.1021/am508594p

29. Hummers, W.S., Offeman, R.E., (1958), Preparation of Graphitic Oxide, Journal of the American Chemical Society, 80 (6): 1339. http://dx.doi.org/10.1021/ja01539a017

30. Schniepp, H.C., Li, J.L., McAllister, M.J., Sai, H., Herrera-Alonso, M., Adamson, D.H., Prud'Homme, R.K., Car, R., Saville, D.A., Aksay, I.A., (2006), Functionalized Single Graphene Sheets Derived From Splitting Graphite Oxide, The Journal of Physical Chemistry B, 110 (17): 8535â€“8539. http://dx.doi.org/10.1021/jp060936f

31. Shahriary L., Athawale A.A., (2014), Graphene Oxide Synthesized By Using Modified Hummers Approach, Intenational Journal of Renewable Energy and Environmental Engineering, Vol. 02, No. 01, 58-63.

32. Wu, F., Lu, Y., Shao, G., Zeng, F., Wu, Q., (2012), Preparation of Polyacrylonitrile/Graphene Oxide By In Situ Polymerization, Polymer International, 61(9), 1394-1399. http://dx.doi.org/10.1002/pi.4221

33. Kanara Ş., (2014), İletken Polimerik Kompozit Tekstil Yüzeylerinin Elektriksel, Elektromanyetik Kalkanlama ve Sensör Davranışlarının Araştırılması, Yüksek Lisans Tezi, K.Maraş, Türkiye.

34. Çetiner S., (2011), Polipirol-Poli(Akrilonitril-Ko-Vinil Asetat) Kompozit İnce Film Ve Nanolif Oluşumu Ve Karakterizasyonu, Doktora Tezi, İstanbul Teknik Üniversitesi, Türkiye.

35. Uddin Md. E., Layek R.K., Kim N.H., Hui D., Lee J.H., (2015), Preparation and Prpperties of Reduced Graphene Oxide/Polyacrylonitrile Nanocomposites Using Polyvinyl Phenol, Composites Part B: Engineering, 80, 238-245. http://dx.doi.org/10.1016/j.compositesb.2015.06.009

36. Rahaman, M.S.A., Ismail, A.F., & Mustafa, A., (2007), A Review Of Heat Treatment On Polyacrylonitrile Fiber, Polymer Degradation and Stability, 92(8), 1421-1432. http://dx.doi.org/10.1016/j.polymdegradstab.2007.03.023

37. Lee, S., Kim, Y.J., Kim, D.H., Ku, B.C., Joh, H.I., (2012), Synthesis and Properties of Thermally Reduced Graphene Oxide/Polyacrylonitrile Composites, Journal of Physics and Chemistry of Solids, 73(6), 741-743. http://dx.doi.org/10.1016/j.jpcs.2012.01.015

38. Cui, P., Lee, J., Hwang, E., & Lee, H., (2011), One-Pot Reduction Of Graphene Oxide At Subzero Temperatures, Chemical Communications, 47(45), 12370-12372. http://dx.doi.org/10.1039/c1cc15569e

39. Loryuenyong V., Totepvimarn K., Eimburanapravat P., Boonchompoo W., and Buasri A., (2013), Preparation And Characterization of Reduced Graphene Oxide Sheets Via Water-Based Exfoliation And Reduction Methods, Hindawi-Advances In Materials Sci. and Eng., Volume 2013, ArticleID 923403, 5 page.

40. Badawy, S.M., & Dessouki, A.M., (2003), Cross-Linked Polyacrylonitrile Prepared By Radiation-Induced Polymerization Technique, The Journal of Physical Chemistry B, 107(41), 11273-11279. http://dx.doi.org/10.1021/jp034603j